-
RD5 is 5HP machine with a peak stroke of 2.0" and peak speeds over 40 in/sec. The RD5 uses CTW-Probe Analysis software to allow the user to create and run Tests of various velocities on one of three strokes to collect force data that is presented in various industry-standard graphs. The RD5 is a compact, lightweight tabletop machine that is designed to be structurally sound where loading is applied based on FEA analysis. Measurements are taken based on the line of actuation to ensure only the damper or specimen result is recorded.
-
RD7.5 is 7.5HP machine with a peak stroke of 6.0" (imperial) or 160mm (metric) and peak speeds to 3.0 m/sec. CTW presents the 7.5 HP damper machine. Designed to meet the market demand for more stroke and higher velocities at a reasonable price. Initially it was for the motorcycle markets but its power and speed allow it to fit nicely into the industrial areas as well. The RD7.5 uses CTW-Probe Analysis software to allow the user to create and run Tests of various velocities on one of three strokes to collect force data that is presented in different industry standard graphs. The RD7.5 is a floor model designed to be structurally sound where loading is applied based on FEA analysis. Measurements are taken based on the line of actuation to ensure only the damper or specimen result is recorded.
-
6 linear motors and 8 inches / 200 mm of travel The LA68 comes with a fully automated crossbar that allows the user to easily clamp / unclamp the crossbar and raise / lower it as well all through a keypad interface screen. It also has (2) available speeds for movement so that large distances can be moved and then a slower, finer adjustment can be made for mounting the specimen in the test area. The User will interface with the crossbar with the following keypad with access to various functions.
- Motor Temperature monitor with active integrated cooling limits
- Crossbar Status Indicator
- Clamp / Release
- Locked / unlock
- Crossbar Position with User defined “zero”
- Two-Speed control of movement
- Fast for large travel adjustments
- Slow for damper mounting
- 1000 mm range of movement
- 900 lbf of force available to compress / extend the specimen / damper
-
6 linear motors and 18 inches / 450 mm of travel *When you simply need more stroke than 8 inch / 200 mm to cross all the ports in your damper, this is the machine for you.* The LA68 comes with a fully automated crossbar that allows the user to easily clamp / unclamp the crossbar and raise / lower it as well all through a keypad interface screen. It also has (2) available speeds for movement so that large distances can be moved and then a slower, finer adjustment can be made for mounting the specimen in the test area. The User will interface with the crossbar with the following keypad with access to various functions.
- Motor Temperature monitor with active integrated cooling limits
- Crossbar Status Indicator
- Clamp / Release
- Locked / unlock
- Crossbar Position with User defined “zero”
- Two-Speed control of movement
- Fast for large travel adjustments
- Slow for damper mounting
- 1000 mm range of movement
- 900 lbf of force available to compress / extend the specimen / damper