4 motors and 8 inches of travel
- Fully Electric – Magnetic linear actuator for instant on motion and force
- Usable stroke range of 8+ inches / 200+ mm
- Peak force of 4,100 lbf. < > 18.24 kN
- 4,000 lbf. out to 80 in/sec < > 2.00 Met/sec
- 475 lbf. to 216 in/sec < > 5.50 Met/sec
- Based on 240VAC power +/-2.5%
- Peak Velocity of 220 in/sec & 5.60 Met/sec
- Acceleration of 120+ G’s peak & 30 G’s continuous
- Frequency response above 200 Hz
- Optimized motion for cooler and quieter operation
- Includes complete Win10 operating system with computer and monitor
- Sine, Triangle, Split Velocity/ Variable Velocity, track data and more
- Input power 208-240 VAC III phase – 60 A(i)
- Fully Electric – Magnetic linear actuator for instant on motion and force
- Usable stroke range of 8+ inches / 200+ mm
- Peak force of 4,100 lbf. < > 18.24 kN
- 4,000 lbf. out to 80 in/sec < > 2.00 Met/sec
- 475 lbf. to 216 in/sec < > 5.50 Met/sec
- Based on 240VAC power +/-2.5%
- Peak Velocity of 220 in/sec & 5.60 Met/sec
- Acceleration of 120+ G’s peak & 30 G’s continuous
- Frequency response above 200 Hz
- Optimized motion for cooler and quieter operation
- Includes complete Win10 operating system with computer and monitor
- Sine, Triangle, Split Velocity/ Variable Velocity, track data and more
- Input power 208-240 VAC III phase – 80 A(i)
- Longer columns sold in +12” / 305 mm increments
- Longer travel actuators.
- 13 inches of full travel
- 18 inches of full travel
- Safety enclosure / cage
- Hinged door mounted on the left of the enclosure / cage, closed with latch
- option will change crating and shipping
- CE addition for the enclosure / cage
- Enclosure is locked and cannot be opened until machine is disabled
- industry standard double redundant features
- NIST traceable calibrations for force and displacement signals
- Gas assist on the crossbar for a “zero-weight” feel when moving / loading damper
- struts carry the load of the crossbar making it easier to handle
- Fully automated crossbar raise / lower and clamp / unclamp
- (2) speed movement - slow and fast
- tablet interface as well as full computer control of crossbar
- see additional information at end of document
- Side loading mechanism
- pneumatic actuator applying up to 225 lbs. / 1,000 N
- force driven by user within CTW Probe using analog out function
- Additional channels (6) for extra signals / sensors to be collected during operation within CTW Probe
- additional information at end of document
- Digital IO for signaling external devices during the Test sequence
- Used within a CTW Probe Test Sequence this can be used to turn on / off external devices
- Includes 8 total to be configured per customer requirement using CTW interface
- Analog out of Displacement and force signals
- User interface to gather real time signals
- Analog out 0 - 5 VDC
- command driven within CTW Probe software
- Customer can opt to pick-up in Lexington, NC but then NC State tax applies
- Crate – International heat treated
- Shipping – to be determined
- By ground transport in Continental US
- International shipping is not a problem
Main Products
CTW presents the LA Series of high performance linear actuators ready to open your testing envelope to any wave form you desire.
CTW Automation’s line of LA, linear actuators, are based on an “ironless” motor design. These brushless linear servo motors provide the smoothest possible motion with zero-cogging or the force-ripple found in other solutions. This compact design places the motor (forcer) within a U-channel of rare earth magnets to form a compact and modular assembly. Because of this packaging, CTW can stack motors in parallel and allow for the addition of multiple units to generate the power required by the User. The LA series come in three standard configurations of 2, 4 and 6 motor configurations. These systems offer a wide range of dynamic forces matched with high frequency response, large strokes and very fast velocities delivered with the smoothest motion. Standard strokes are 8.0 in / 200 mm with larger strokes available.
And best of all, these systems are shipped completely ready to run; plug and play. Since every system is fully completed at CTW, the system that is shipped only needs to be connected to power and the user is ready to Test.
LA-8 Series
LA-10 Series
LA-Extended Stroke Series
LA-HV High Velocity Series
For additional questions and sales information,
- contact us through sales@CTWautomation.com
- Or if you prefer, please contact us directly at:scott@CTWautomation.com, michael@CTWautomation.com
- Or call at 336-542-5252
Leasing available through ACG Equipment Finance – Follow to our custom CTW page!
