RD10 End of Line Production Testing System
- Barcode Reader with Database connection
- Automated upper and lower gripping
- Changeable grippers for a variety of damper ends
- Automated and integrated crossbar for clamp / unclamp
- Automated raise / lower crossbar to set and preload the damper
- Fully Safety interlock enclosure with 4 sides
- CTW Probe Validation with Pass / Fail analysis
- Password protected screens
- High precision Interface 5K pancake load cell
- CTW designed multi-stroke crank head for frequency variation in testing
- Imperial OR Metric spacing availble: NEW longer stroke
- 1.0"-1.5"-2.0"-3.0"-4.0"-5.0"-6.0" (Imperial)
- 20-25-40-50-75-100-125-150-160 mm (Metric)
- Peak velocity beyond 120 in/sec & 3.00 met/sec on the maximum stroke
- ultimate force / velocity determined by the damper and piston
- Linear design will vary from digressive
- Peak forces based on damper design and CTW determined velocity variation.
- Peak forces well over 4,500 lbs. / 20kN
- Data sampled at 16 bit resolution via CTW specified data card
- Position adjustable non-contacting IR Temperature sensor
- Precision 1.50" shafting designed for minimal stretch and low weight
- can operate on 200/240 VAC I phase power but not at peak power
- Software operates and all platforms for data viewing, Windows, Apple, tablet and phones
- Demo version available so that you can always have access to your data
- Longer columns +12”/300mm
- Clevis fixtures (exchange for standard 1/2”)
- Optional - 3/8" or 5/16"
- Range of custom fixtures available on request
- Examples - Motorcycle & bicycle and more
- NIST traceable calibrations
- Safety enclosure / cage / CE interlock systems
- 380/440 VAC III phase power (European)
- Customer can opt to pick-up in Lexington, NC but then NC State tax applies
- Crate – International heat treated
- Shipping – to be determined
- By ground transport in Continental US
- International shipping is not a problem
For additional questions and sales information,
contact us through sales@CTWautomation.com
Or if you prefer, please contact us directly at: scott@CTWautomation.com, michael@CTWautomation.com
Or call at 336-542-5252
Leasing available through ACG Equipment Finance – Follow to our custom CTW page!
